Description: PTZoptics Camera Ready Dotworkz D2 Heater Blower Camera Enclosure IP68 with MVP (PTZO-HB)
The Heater Blower D2 protects all PTZOptics SDI, NDI, and USB cameras in all weather conditions
This is the PTZO-HB. This enclosure has been designed for outdoor use in a variety of environments. The HB in PTZ-HB standards for heater blower which is included inside the unit. This enclosure has been designed for outdoor use in colder environments. The heater blower unit is ideal for removing condensation or fog that can accumulate on the enclosure lens and prevent the cameras from capturing clear video.
The Dotworkz D2 environmental housing sets the industry standard for design excellence in camera protection from the rigors of outdoor use, vandalism and physical damage. To offer this superior performance in a cost-effective, all-weather package, Dotworkz has incorporated its proven Heater/Blower system into the D2 architecture. It is ideal in weather conditions ranging from 30° F (-1° C) to 95° F (35° C), where it will maintain PTZ cameras at optimal operating temperature.
Excessive cold and heat could potentially damage sensitive IP and analog cameras. To combat the cold, the unit’s heater automatically activates at 40° F (4° C) and deactivates at 60° F (15° C) with a thermal cut-off assuring safe heating operation. The blower remains on at all time, keeping cameras cool and fog free. The Heater-Blower D2 system is expandable to our dual blower Tornado system.
The ultimate barrier between the camera and environmental factors, the Heater-Blower D2 significantly reduces weather-related wear-and-tear. It is tested to be water, dust and air tight.
For the most extreme climates, Dotworkz suggests the D2 equipped with either the COOLDOME™ module designed for use where temperatures above 105° F (66° C) or the Ring of Fire™ module that will prevent cameras from freezing in climates down to -40° F (-40° C).
Included: EZ Lock Pole Mount Bracket (BR-MPM1)
Works with all Dotworkz Camera Housings!
Dotworkz EZ Lock Pole Mount Adapter is a feature rich mounting adapter. Easily secures to poles with a minimum of ¾” diameter. An Angle Correction Plate can be added to correct the angle of the enclosure up to 10 degrees for non plum poles, it also has Component Attachment antenna mounts for adding additional Omni or yogi antennas.